Dimension Engineering Controllers

Introduction

Manufactured in the USA by Dimension Engineering, these controllers are just what the small end of the robot market has been waiting for. Featuring versatile input options such as voltage , RC and serial data, regen breaking and current limit make these are most advanced controllers in the sub 30A controller class.

SyRen 10 Regen 10A Motor Controller - Part No: 1506-001
The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 6kg (possibly 12kg in certain cases) in combat, higher for non-combat applications.

Out of the box, the SyRen 10 can supply a single DC brushed motor with up to 10A continuously. Peak currents of 15A are achievable for a few seconds.

Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.

More Info…

Price: £30.49 (Including VAT at 17.5%)
Shipping Weight 0.026 Kg

Buy any 5 or more and save 10% - Click for qualifying products
Quantity:

People who bought this item also bought:

1. Miniature Bearing 688ZZ 8X16X5 (Ref: 4255-142)

2. Silicone Insulated 6mm2 Red (Ref: 1130-030)

3. Silicone Insulated 6mm2 Black (Ref: 1130-031)

4. 15A to 45A Red Housing (Ref: 1210-021)

5. 15A to 45A Black Housing (Ref: 1210-022)

SyRen 25 Regen 25A Motor Controller - Part No: 1506-002
The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 12kg in combat, 50kg or more for general purpose robotics.

Out of the box, the SyRen 25 can supply a single DC brushed motor with up to 25A continuously. Peak currents of 45A are achievable for a few seconds.

Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.

More Info…

Price: £45.99 (Including VAT at 17.5%)
Shipping Weight 0.055 Kg

Buy any 5 or more and save 10% - Click for qualifying products
Currently Unavailable
People who bought this item also bought:

1. Equipment Wire 7/0.2 Blue Pk of 10m (Ref: 1130-052)

2. Circuit Breaker 10A (Ref: 1390-010)

3. 12 Way Terminal (chocolate) Block 60A (Ref: 1230-014)

4. 12 Way Terminal (chocolate) Block 15A (Ref: 1230-012)

Sabertooth Dual 5A Motor Controller - Part No: 1506-003
Sabertooth 2X5 is the motor driver of choice for small differential-drive robots. It is ideal for smaller robots- up to 2kg in combat but higher for general purpose use. It is also a great choice in any application where you need to control two brushed motors.

Out of the box, the Sabertooth can supply two DC brushed motors with up to 5A each continuously. Peak currents of 10A are achievable for short periods. Because Sabertooth 2x5 incorporates soft current limiting and thermal protection, you need not worry about killing the driver with accidental stalls or by hooking up too big a motor.

More Info…

Price: £36.99 (Including VAT at 17.5%)
Shipping Weight 0.019 Kg

Buy any 5 or more and save 10% - Click for qualifying products
Quantity:

People who bought this item also bought:

1. Magnetic Compass (Ref: 3801-010)

2. Tamiya Wired Connectors (Ref: 1064-003)

3. Pro-Peak Delta Base NiCd & NiMH 4-8 Cell to 2.5A (Ref: 1075-001)

4. Technobots Feather Gold 24V 150W (Ref: 1410-010)

5. EMG30 Geared Motor 4.22W with Encoder (Ref: 1453-005)

Sabertooth Dual 5A Motor Controller for RC - Part No: 1506-004
Sabertooth 2X5 R/C is a dual motor driver specifically optimized for use in radio controlled vehicles. It is suitable for small robots, cars and boats, and especially well suited for the Antweight class and above to 2kg classes of fighting robots.
Out of the box, it can supply two DC brushed motors with up to 5A each. Peak currents of 10A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.

This R/C version comes with an invert channel and options for exponential control, autocalibration and built-in mixing. The operating mode is set with the onboard DIP switches so there are no jumpers to lose.

More Info…

Price: £36.99 (Including VAT at 17.5%)
Shipping Weight 0.018 Kg

Buy any 5 or more and save 10% - Click for qualifying products
Quantity:

People who bought this item also bought:

1. Treaded Rubber 101mm dia Wheels PK 2 (Ref: 4608-019)

Sabertooth Dual 5A Motor Controller for RC

Sabertooth Dual 10A Motor Controller - Part No: 1506-005
The Sabertooth 2X10 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots - up to 6kg in combat (possibly 12kg in certain cases) higher for general purpose robotics.

Out of the box, the Sabertooth can supply two DC brushed motors with up to 10A each. Peak currents of 15A are achievable for a few seconds.

Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.

More Info…

Price: £47.99 (Including VAT at 17.5%)
Shipping Weight 0.060 Kg

Buy any 5 or more and save 10% - Click for qualifying products
Quantity:

People who bought this item also bought:

1. Pololu Serial 8-Servo Controller (Ref: 3800-102)

2. 200mm Servo Leads Tinned Bare Ends (Ref: 3601-008)

3. 300mm Servo Extension Lead (Ref: 3601-003)

Sabertooth Dual 10A Motor Controller for RC - Part No: 1506-006
Sabertooth 2X10 R/C is our dual motor driver specifically optimized for use in radio controlled vehicles. It is suitable for medium powered robots, cars and boats.

Out of the box, it can supply two DC brushed motors with up to 10A each. Peak currents of 15A are achievable for a few seconds. Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.

This special R/C edition of our motor driver comes with an invert channel and options for exponential control, autocalibration and built-in mixing. The operating mode is set with the onboard DIP switches so there are no jumpers to lose.

More Info…

Price: £38.95 (Including VAT at 17.5%)
Shipping Weight 0.034 Kg

Buy any 5 or more and save 10% - Click for qualifying products
Currently Unavailable
People who bought this item also bought:

1. Crimp Red Female Blade 6.3 x 0.8 (Ref: 1222-003)

2. Pro-Peak Delta Base NiCd & NiMH 4-8 Cell to 2.5A (Ref: 1075-001)

3. Silicone Insulated 2.5mm2 Red (Ref: 1130-034)

4. Silicone Insulated 2.5mm2 Black (Ref: 1130-035)

5. 50A Power Connector Grey (Ref: 1210-001)