Online Catalogue
  [ Technical Support ] [ Home ] [ New Products ] [ Shipping ] [ Calculators ] [ About Us ]   [ Terms ]  [ Full Search ]  [ Basket ]  [ Checkout ]  [ Login ] [ Site Map ]

Sensors

Online Catalogue |  Sensors & Modules |  Sensors

Using our USB InterfaceLayout
SRF02 Ultrasonic Range Finder - Part No: 3801-006
Best in class performance!

Lowest cost ultrasonic ranger with both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, automatically, in the background, and with no calibration cycles necessary. Additional new commands allow for separate burst and ranging control.

Easy connection to USB host with the USBI2C module. Self powered from the USB bus.

SRF02 Specification
Voltage - 5v only required
Current - 4mA Typ.
Frequency - 40KHz
Range - 15cm - 6m.
Analogue Gain - Automatic 64 step gain control
Connection Modes :
1 - Standard I2C Bus.
2 - Serial Bus - connects up to 16 devices to any uP or UART serial port
Full Automatic Tuning - No calibration, just power up and go
Timing - Fully timed echo, freeing host controller of task.
Units - Range reported in uS, mm or inches.
Light Weight - 4.6gm
Small Size - 24mm x 20mm x 17mm height.



Larger Image

Price: £11.74 (Including VAT at 17.5%)
Shipping Weight 0.010 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. Pololu Micro Serial Servo Controller (Ref: 3800-100)
2. Tamiya 70168 Double Gearbox (Ref: 1452-001)
3. Futaba Servo S3003 (Ref: 3200-001)
4. Tamiya Female Connector Pk of 5 (Ref: 1064-011)
5. MFA 12V 500mA SLA Charger (Ref: 1070-032)


Related products:
1. USB I2C Interface (Ref: 3810-005)
SRF02 Ultrasonic Range Finder
SRF04 Ultrasonic Range Finder - Part No: 3801-004
Voltage - 5v only required
Current - 30mA Typ. 50mA Max.
Frequency - 40KHz
Max Range - 3 m
Min Range - 3 cm
Sensitivity - Detect 3cm diameter broom handle at > 2 m
Input Trigger - 10uS Min. TTL level pulse
Echo Pulse - Positive TTL level signal, width proportional to range.
Small Size - 43mm x 20mm x 17mm height







More Info…

Price: £16.80 (Including VAT at 17.5%)
Shipping Weight 0.010 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  

SRF04 Ultrasonic Range Finder
Pin-Out
SRF05 Ultrasonic Range Finder - Part No: 3801-005
Voltage - 5v only required
Low Current - 4mA Typ.
Frequency - 40KHz
Max Range - 4 m
Min Range - 1 cm
Modes - Single pin for trig/echo or 2 Pin SRF04 compatible.
Input Trigger - 10uS Min. TTL level pulse
Echo Pulse - Positive TTL level signal, width proportional to range.
Small Size - 43mm x 20mm x 17mm height



Larger Image

Price: £13.50 (Including VAT at 17.5%)
Shipping Weight 0.010 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. Pan Head M3 x 8 per 50g (Ref: 4300-001)
2. Solarbotics GM9 90 Degree (Ref: 1451-006)
3. Tamiya 70097 Twin-Motor Gearbox (Ref: 1452-003)
4. DPDT Minitaure Toggle Switch (Ref: 1610-114)
5. Pocket DMM (Ref: 1710-006)
SRF05 Ultrasonic Range Finder
SRF08 Ultrasonic Range Finder - Part No: 3801-002
SRF08 Specification
Voltage - 5v only required
Current - 15mA Typ. 3mA Standby.
Frequency - 40KHz
Range - 3cm -6m.
Max Analogue Gain - Variable 94 to 1025 in 32 steps.
Connection - Standard I2C Bus.
Light Sensor - Front Facing light sensor.
Timing - Fully timed echo, freeing host controller of task.
Echo - Multiple echo - keeps looking after first echo.
Units - Range reported in uS, mm or inches.
Small Size - 43mm x 20mm x 17mm height







Larger Image

Price: £29.96 (Including VAT at 17.5%)
Shipping Weight 0.010 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. USB I2C Interface (Ref: 3810-005)
2. Switching 3.3V Regulator 1A (Ref: 1062-019)
SRF08 Ultrasonic Range Finder
SRF10 Ultrasonic Range Finder - Part No: 3801-001
Voltage - 5v only required
Current - 15mA Typ. 3mA Standby
Frequency - 40KHz
Max Range - 6 m
Min Range - 3 cm
Max analogue gain - variable 40 to 700 in 16 steps
Connection I2C Bus
Fully timed echo, freeing host controller of task
Units - range reported in uS, mm or inches
Small Size - 32mm x 15mm x 10mm height





Larger Image

Price: £29.96 (Including VAT at 17.5%)
Shipping Weight 0.003 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. USB I2C Interface (Ref: 3810-005)
2. Assembled RS232 Serial Adaptor (Ref: 3810-002)
3. Picaxe-28X IC (Ref: 3803-102)
4. Picaxe-28A Starter Pack (Ref: 3803-003)
5. Mounting Kit for 3801-001 (Ref: 3801-008)


Related products:
1. Mounting Kit for 3801-001 (Ref: 3801-008)
SRF10 Ultrasonic Range Finder
Mounting Kit for 3801-001 - Part No: 3801-008
Mounting kit for the SRF10 above
Larger Image

Price: £3.51 (Including VAT at 17.5%)
Shipping Weight 0.030 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. SRF10 Ultrasonic Range Finder (Ref: 3801-001)
Mounting Kit for 3801-001
SRF235 Pencil Beam US Finder - Part No: 3801-003
SRF235 Specification
Voltage - 5v only required
Current - 25mA Typ.
Frequency - 235KHz
Range - 10cm -1.2m.
Beam Width - Narrow Beam - Just 15°
Connection - Standard I2C Bus.
Timing - Fully timed echo, freeing host controller of task.
Units - Range reported in uS, mm or inches.
Small Size - 34mm x 20mm x 19mm height.



More Info…

Price: £62.39 (Including VAT at 17.5%)
Shipping Weight 0.010 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  

SRF235 Pencil Beam US Finder
Magnetic Compass - Part No: 3801-010
Voltage - 5v only required
Current - 20-mA Typ
Resolution - 0.1 Degree
Accuracy - 3-4 Degrees after calibration
Output 1 - Timing pulse 1mS to 37mS in 0.1mS increments
Output 2 - I2C Interface, 0-255 and 0-3599, SCL speed up to 1MHz
Small Size - 32mm x 35mm









Larger Image

Price: £25.99 (Including VAT at 17.5%)
Shipping Weight 0.005 Kg


Buy any 25 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. 10 bar Pushfit BSP Stud 4 x 1/8 (Ref: 4020-020)
2. EMG30 Geared Motor 4.22W with Encoder (Ref: 1453-005)
3. 24V 150W 6812S (Ref: 1470-004)
4. Dual 50V 5A H Bridge Speedo (Ref: 1502-001)
5. 12V 3A Dual H-Bridge Controller + Encoder Feedback (Ref: 1502-020)
Magnetic Compass
TPA81 8x1 Thermopile Array - Part No: 3801-020
Voltage - 5v only required
Current - 5mA Typ. excluding servo
Temperature Range - 4°C - 100°C
Accuracy (Full FOV) - +/-3°C from 4°C to 10°C
+/-2°C +/-2% from 10°C to 100°C,
Field of View - 41° x 6° (8 pixels of approx. 5° x 6°)
Outputs - 1 ambient + 8 pixel temperatures
Communication - I2C Interface
Servo - Controls servo in 32 steps to 180° rotation
Small Size - 31mm x 18mm



More Info…

Price: £50.55 (Including VAT at 17.5%)
Shipping Weight 0.010 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. Magnetic Compass (Ref: 3801-010)
2. SRF02 Ultrasonic Range Finder (Ref: 3801-006)
3. Pololu Micro Serial Servo Controller (Ref: 3800-100)
4. 3D 3g Accelerometer (Ref: 3340-003)
5. Servo Tester (Ref: 3260-020)
TPA81 8x1 Thermopile Array
2g Accelerometer - Part No: 3340-001
The DE-ACCM2G is an off the shelf 2 axis 2g accelerometer solution with analog outputs. It features integrated op amp buffers for direct connection to a microcontroller's analog inputs, or for driving heavier loads.






More Info…

Price: £14.49 (Including VAT at 17.5%)
Shipping Weight 0.001 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. Tbot Chain Link 06B 3/8 (Ref: 4216-112)
2. 4 x AA Battery Holder Press Stud Block (Ref: 1063-033)
3. 400 Point Solderless Breadboard (Ref: 1261-004)
4. Picaxe Experimenters Board Kit (Ref: 3803-020)
5. Chain Sprocket 3/8 In - 9T (Ref: 4212-002)
2g Accelerometer
5g Accelerometer - Part No: 3340-002
The DE-ACCM5G is an off the shelf 2 axis 5g accelerometer solution with analog outputs. It features integrated op amp buffers for direct connection to a microcontroller's analog inputs, or for driving heavier loads.






More Info…

Price: £14.49 (Including VAT at 17.5%)
Shipping Weight 0.001 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. Plastic Gear 10T (Ref: 4600-001)
2. 3D 3g Accelerometer (Ref: 3340-003)
3. SRF10 Ultrasonic Range Finder (Ref: 3801-001)
4. Picaxe-28A Starter Pack (Ref: 3803-003)
5. Picaxe-28X IC (Ref: 3803-102)
5g Accelerometer
More views
3D 3g Accelerometer - Part No: 3340-003
The DE-ACCM3D is the most advanced analog accelerometer solution to date, featuring a triple axis ±3g accelerometer chip. It also has integrated op amp buffers for direct connection to a microcontroller's analog inputs, or for driving heavier loads.






More Info…

Price: £22.49 (Including VAT at 17.5%)
Shipping Weight 0.002 Kg


Buy any 5 or more and save 10% - Click for qualifying products
Quantity:  


People who bought this item also bought:
1. 4mm 36A Banana Plug Black (Ref: 1240-011)
2. 3V Lithium Cell CR2032 (Ref: 1031-005)
3. Pololu 30A Dual Motor Driver VNH2SP30 (Ref: 1503-010)
4. 24V 150W 6812S (Ref: 1470-004)
5. Solarbotics TPM2 Tiny Pager Motor Style 2 (Ref: 1451-018)
3D 3g Accelerometer

Online Catalogue |  Sensors & Modules |  Sensors

Copyright Technobots Ltd 2001 - 2008